Mixing system for release agent - CN METAL foundry products



Go to content

Mixing system for release agent

Products > Foundry plants > Mixing

M ixing
Mixing system water-release agent for foundry
custom made
Mixing system
MIXING SYSTEM MODEL "SMALL"

Mixing system water-release agent with pneumatic pump
and accumulator 25 lt. with direct connection to lubrificator
or centralized tank, ideal for Max 1/2 presses, full automatic cycle


"SMALL"  TYPE   


TECHNICAL FEATURES:
Pneumatic pump scale of use 0,5 - 4 % (max flow 2500 Lt./h)
Pneumatic filling pump max 4 bar
By-pass button with electrovalve 24Volt
Flow rate air pump emulsion in 2 versions
50 Lt./min – 120 Lit./min

"SMALL Plus"   TYPE



TECHNICAL FEATURES:
Pneumatic pump scale of use 0,5 - 4 % (max flow 2500 Lt./h)
Electric filling pump with accumulator 25 Lt
Electric pump emulsion 50 Lt./min with exit pressure10 bar

Available with pressure exit 5,2 bars

Mixing system for foundry
Mixing system model "small"
Mixing system for foundry 10 bar
Mixing system model "small Plus"
Mixing system water release agent for die casting
Mixing system model "big"
MIXING SYSTEM  MODEL "BIG"

Mixing system water-release agent with pneumatic pump
and accumulator 300 lt. with direct connection to lubricator
or centralized tank, ideal for Max 8/10 presses, full automatic cycle


TECHNICAL FEATURES:
Pneumatic pump scale of use 0,5 - 4 % (max flow 2500 Lt./h)
Filling pump self priming electrical 220 Volt
By-pass button with electrovalve 24Volt
Flow rate electric pump 4.000 Lt./h

Mixing system water release agente with accumulator Lt.100
Mixing system model "double" with accumulator Lt.100
MIXING SYSTEM MODEL"DOUBLE"

Mixing system water-release agent with double pneumatic pump
and 2 accumulators of lt. 25 each with direct connection to lubricator
or centralized tank, ideal for 4 presses from 5.000 tons,
full automatic cycle


TECHNICAL FEATURES:
Pneumatic pump scale of use 0,5 - 4 % (max flow 2500 Lt./h)
Pneumatic filling pump  (max 4 bars)
By-pass button with electrovalve 24Volt
Flow rate pneumatic emulsion pump 100 Lt./min
Mixing system water release agent die casting
Mixing system model "double"
MIXING SYSTEM MODEL "DOSOMIX 35"

Mixing system water release-agent produced
for obtain a dosed and accurate emulsion
Mixing system water release agent for die casting
Mixing system model "Dosomix 35"
Mixing system water release agent for die casting
Mixing system model "Dosomix 35"
Mixing system water release agent for die casting
Mixing system model "Dosomix 35"

TECHNICAL FEATURES:

Perfec for foundry with  10/20 presses

Capacity Lt. 1.500/h
with specimen percentage in use
range diluition 0,2 - 6 %


Ideal for foundry with max 2 Presses

Model with pneumatic pump
and accumulator Lt.25
Capacity tank emulsion Lt.100

Pneumatic filling pump (max 4 bars)
Flow rate pneumatic emulsion pump in 2 variations:
Lt.50/min - Lt.120/min
RELEASE AGENT DOSING PUMP


Available in various range of diluition and flow

Possible option with pre-mounted plant over panel
with double valve,  brass flow meter and pressure gauge



Pneumatic pump release agent dosatron
Dosing pump for release agent
Range diluition 0,5 - 4%
Pressure from 0,3 to 6 bar
Flow rate 2500 Lt./H
Pneumatic pump assembled over panel dosatron
Dosing pump for release agent
Range diluition 0,5 - 4%
Pressure from 0,3 to 6 bar
Flow rate 2500 Lt./H
Contact

CN METAL S.r.l.
Metals-Foundry products


Opening hours:
Mon-Fri 08:00-12:00 a.m.  1:00-5:00 p.m.



Follow us:
 1998 - 2018



Via del lavoro, 18
Tel +39 0376 737610
info@ciennemetal.com


Via del lavoro, 18
Tel +39 0376 737610
info@ciennemetal.com
Back to content